Temporary works PE — scaffolding, formwork, hoarding, gantry, all signed off.

Every active Singapore construction site needs PE endorsement on its temporary works. Scaffolding higher than 6m. Hoarding on a public road. Tower crane bases. Pile mats. Event stages. CVC Engineers handles the design check, calculations, and Workplace Safety & Health endorsement on all of it.

Get a temp-works quote

What temporary works actually means in Singapore.

Anything erected on site that exists only during construction — scaffolding to give workers access, formwork to hold wet concrete, hoarding to protect the public, gantries to span over roads, the very tall tower crane sitting on a tiny patch of ground.

Temporary structures are regulated separately from the permanent building. The chain of accountability runs through the Workplace Safety and Health Act (under MOM), the WSH (Construction) Regulations, and BCA's Technical Reference 3 (TR3) — Code of Practice on Falsework.

The triggers requiring PE endorsement:

  • Scaffolding over 6m high, around any building, or on any public-facing facade
  • Formwork & falsework for slabs, beams, and columns being cast in situ
  • Hoarding at the boundary of any active site adjacent to a road or public way
  • Gantry spanning over roads, MRT lines, or pedestrian routes
  • Tower crane base design — including pile mat for crawler and mobile cranes
  • Pile mat / working platform for piling rig support
  • Event & stage structures for outdoor events, festivals, conferences
  • Loading platform and material hoist platforms

The standards CVC Engineers designs to:

  • BCA TR3 — Falsework Code of Practice (the bible for formwork)
  • SS 280 — Steel Tubular Scaffolds (mandatory for all tube-and-coupler scaffolds)
  • SS EN 12810/12811 — Façade scaffolds and working scaffolds
  • BS 5975 — Code of practice for temporary works procedures
  • WSH (Construction) Regulations — site-wide safety obligations
  • SCDF requirements for hoarding fire-rating in shop-front zones
  • LTA road-occupation permit requirements where works affect the road reserve

The PE endorsement is required at the design stage, but inspection records are kept throughout construction. CVC also handles modifications mid-project — when the contractor changes scope and the original endorsement no longer covers it.

WSH Act (MOM) ↗ BCA TR3 ↗ SS 280 · SS EN 12810/12811 WSH (Construction) Reg

A real scaffolding endorsement sheet.

External façade scaffolding for a 6-storey building — tube-and-coupler system tied back into structure at every level. Includes elevation, plan, base plate detail, and the load calc that backs the SS 280 sign-off.

DWG · CVC-TS-001 FAÇADE SCAFFOLDING · 24m HIGH · TUBE & COUPLER · TIE-IN @ EVERY FLOOR SCALE 1:75 REV B · 2026-05
① ELEVATION — FAÇADE SCAFFOLD + TIE-IN PATTERN ② PLAN — TWO-BAY DEPTH ③ BASE PLATE DETAIL EXISTING BLDG FACE F6 F5 F4 F3 F2 F1 GF TIE-IN @ EVERY FLOOR M16 EXP. ANCHOR 30 kN DEBRIS NETTING 24.0m 12 LIFTS @ 2.0m 2.0 2.0 2.0 2.0 8.0m TOTAL BAY LENGTH PLAN — TWO-BAY DEPTH (1.2m × 8.0m) EXISTING BUILDING FACE WORKING PLATFORM 1.2m 8.0m × 12 LIFTS BASE PLATE — DETAIL X Ø48.3 × 4mm STD SPIGOT JOIN 150×150×6mm BASE SOLE BOARD 225mm FIRM GROUND ≥150 kPa P_ULS = 18.5 kN PER STANDARD NOTES: 1) ALL TO SS 280 + BCA TR3 · 2) INSPECT DAILY · 3) NO ALTERATION WITHOUT PE APPROVAL SS 280 LOAD CHECK · COL B TRIB AREA = 2.0m × 1.2m = 2.4 m² DEAD (BOARDS) = 0.20 kPa × 2.4 = 0.48 kN LIVE (WORKERS+TOOLS) = 2.0 kPa × 2.4 = 4.80 kN MATERIAL = 2.5 kPa × 2.4 = 6.00 kN PER LIFT (ULS) = 1.4×0.48 + 1.6×(4.8+6.0) = 17.95 kN per lift 12 LIFTS = 215 kN @ BASE PER STANDARD = 215 ÷ 10 = 21.5 kN CAPACITY (Ø48.3, le=2.0m) = 32 kN ✓ SS 280 cl. 6.4 · OK CVC ENGINEERS · TEMPORARY WORKS PROJECT — FAÇADE A&A SCAFFOLD DRAWING — ELEV + PLAN + DETAIL X SCALE — 1:75 · 1:50 · 1:10 DATE — 2026-05-10 · DRN BY · CVC PE PEB REG NO 5376 · CIVIL QP-S TEMPORARY WORKS ✓ ENDORSED · SIGNED · SEALED VALID UNTIL 2026-12-31 · DAILY INSPECT
SHEET 01/04 · TEMPORARY WORKS PACKAGE PEB 5376 SEAL CHECKED · 2026-05-10 APPROVED · QP-S

Temporary works cost ranges.

Indicative 2026 fees per scope. Excludes site visit travel for sites outside Singapore mainland.

ScopeTypical projectIndicative fee (SGD)Notes
Façade scaffolding endorsementUp to 6-storey building2,000 – 5,000SS 280 design check + tie-in pattern
High-rise façade scaffold10-storey+5,000 – 15,000Includes wind load + multi-level tie-in
Formwork & falsework (BCA TR3)Per pour stage2,500 – 8,000Slab + beam + column formwork design
Hoarding endorsementBoundary along public road1,500 – 4,000Includes wind load + LTA road permit support
Gantry over road / pedestrian waySingle-span5,000 – 15,000LTA approval + structural design
Tower crane base & pile matPer crane8,000 – 25,000Foundation design, pile cap, mat slab
Event / stage structurePer event3,000 – 12,000Outdoor festivals, conferences, rooftop events
Loading platform / material hoistPer platform2,000 – 6,000Per storey level. Wind + load check.

Active site? Send the temp-works scope.

Site address, scaffold height, hoarding length. Contractor name. We reply within one working day with a fixed-fee scope and turnaround.

Get a temp-works quote